Modified modeling of the effect of pH and viscosity on the mass transfer in hydrophobic hollow fiber membrane contactors

This paper studied the effect of pH and the viscosity of feed solution on the mass transfer in two different specifications of hydrophobic hollow fiber membrane contactors. Experimental results showed that the pH of the feed had a significant effect on the rate of mass transfer, the flux and the removal efficiency of easily ionized volatile compounds (VCs), such as ammonia. In unbuffered feed solutions, both the resistance of membrane and the resistance of feed side were affected by the pH of feed and both of them had contributions to the overall mass transfer. A model, , was proposed to predict the effect of pH and gave good agreement with the experimental data for the two contactors. The relationship between viscosities and the mass transfer coefficient could be described by . Based on our experiments, the change of the viscosities in the concentration range of ammonia from 50 to 10,000 mg l⁻¹ caused about 3–4% variation of the mass transfer coefficients. Moreover, it may be more suitable to use the equilibrium concentrations of volatile species instead of the total concentrations of VCs to estimate mass transfer coefficients, removal efficiency and flux. Experimental results also revealed that the choice of the pH of feed might be one of the most crucial factors for removing easily ionized VCs, such as ammonia, from water and wastewater.     

Characterization of low molecular weight components of [(ViMe2SiO1/2)x(PhSiO3/2)y(SiO4/2)z], [(ViMe2SiO1/2)x(SiO4/2)y], and [(SiO4/2)x(HO1/2)y(tBuO1/2)z] silsesquioxanes by electrospray ionization fourier transform mass spectrometry (ESI-FTMS)

This paper describes the characterization of low molecular weight components of four materials using electrospray ionization Fourier transform mass spectrometry (ESI-FTMS). The materials in the current study are [(ViMe₂SiO_1/2)_x(PhSiO_3/2)_y(SiO_4/2)_z] (MTQ), [(ViMe₂SiO_1/2)_x(SiO_4/2)_y] (MQ), and [(SiO_4/2)_x(HO_1/2)_y(^tBuO_1/2)_z] (Q) silsesquioxanes. Accurate mass measurements coupled with knowledge of resin chemistry afforded siloxane composition determination that was used to propose specific structures for the oligomers. Branched or linear (T_nQ_mM_n+2m+2), and monocyclic (T_nQ_mM_n+2m) structures are predominant structures for the low molecular weight species in MTQ. For MQ and Q, more condensed structures, such as partially opened cage structures (Q_mM_2m?6 and Q_mM_2m?8), were identified. The differences between MQ, Q, and MTQ are likely attributed to differences in intrinsic structure and reactivity of T and Q building blocks. The structural information obtained for these oligomeric species will ultimately provide a better understanding of new resin materials and their associated physical properties.     

New fluorescent probes for the detection of mixed sodium and potassium metal ions

A new fluorescent probe 2 is developed that is capable of measuring the concentration of a mixture of sodium and potassium ions in the solution. This probe contains a fluorophore that is utilized in two ways depending on the pH of the solution.     

Effects of matrix-assisted laser desorption/ionization experimental conditions on quantitative compositional analysis of ethylene oxide/propylene oxide copolymers

Matrix-assisted laser desorption/ionization (MALDI) mass spectrometry has the potential to become a valuable tool for the compositional analysis of copolymers. For a copolymer composed of structurally very similar building blocks with minor chain length changes, one would expect the relative peak intensities observed in the MALDI mass spectra to reflect its composition, at least within a narrow mass range. However, we show that variations in experimental conditions in MALDI can have a significant effect on the mass spectral appearance of a copolymer. The effects of concentration, laser power, type of matrices and solvents on mass spectra of an ethylene oxide/propylene oxide copolymer are illustrated. These somewhat surprising results show that great care needs to be exercised when interpreting copolymer spectra for compositional analysis, even for copolymers with structurally similar monomers. This work also points out that further studies are needed to better understand and optimize spectral acquisition conditions for reliable copolymer compositional analysis by MALDI.     

Study of the binding characteristics and transportation properties of a 4-aminopyridine imprinted polymer membrane

Molecularly imprinted polymer membranes containing artificial recognition sites for 4-aminopyridine have been prepared by photopolymerization using 4-aminopyridine as template. Reference membranes were prepared with the same monomer mixture but in the absence of the template. The binding characteristics of the imprinted polymer membrane were investigated by a batch method and the transport properties of the membranes were investigated using diffusion chambers. The results showed that the binding amount of 4-aminopyridine is higher than that of 2-aminopyridine whereas the latter can transport the 4-aminopyridine imprinted polymer membrane faster than 4-aminopyridine.     

A semi-rigid bis(imidazolyl) ligand for the construction of nanoscopic supramolecules. From the molecular rectangle to the 1D coordination polymer

Reaction of the semi-rigid ligand 2,4-bis(1-imidazolylmethyl)-mesitylene (m-bimms) with CdCl₂ afforded a boat-like molecular rectangle [Cd(m-bimms)Cl₂]₂ · 1/2H₂O (1), with the orientation of the two imidazolyl arms of the ligand in syn-conformation and bridging chloride ions bisecting the macrocycle. Weak Cl· · ·H—C interations further extended the dimers into 1D infinite chains with nanoscopic channels. An analogous reaction with Cd(NO₃)₂ gave a 1D coordination polymer [Cd(m-bimms)₂(NO₃)₂]_n · 2nH₂O (2) composed of nanoscopic metallamacrocycles, where the two imidazolyl arms adopt an anti-conformation. Different anions result in different ligand conformations and thus determine the varied molecular architectures.     

氯化铯和氯化镧溶剂体系及四类新化合物的合成

研究了四元体系ＣｓＣｌ－ＬａＣｌ３－ＨＣｌ－Ｈ２Ｏ（２５℃、「ＨＣｌ」＝１３％（ｗｔ），２３％（ｗｔ）和ＣｓＣｌ－ＬａＣｌ３－ＨＡｃ－Ｈ２Ｏ（３０℃，「ＨＡｃ」＝４２％（ｗｔ））的平衡态的溶度数据，并给出制了相应的溶度图，共得到了ＣｓＣｌ．ＬａＣｌ３．４Ｈ２Ｏ、２ＣｓＣｌ．ＬａＣｌ３．２Ｈ２Ｏ和３ＣｓＣｌ．ＬａＣｌ３．３Ｈ２Ｏ３种化合物。对得到的新相进行了热分析，Ｘ射线粉末衍射及偏光性质的测定，依     

Amperometric biosensor for ethanol based on immobilization of alcohol dehydrogenase on a nickel hexacyanoferrate modified microband gold electrode

Alcohol dehydrogenase (ADH) has been immobilized on a nickel hexacyanoferrate modified microband gold electrode surface by a glutaraldehyde/bovine serum albumin (BSA) cross-linking procedure to provide a new amperometric sensor for the assay of ethanol. The resulting enzyme electrode exhibits excellent electrocatalysis for the oxidation of reduced nicotinamide-adenine dinucleotide (NADH). The amperometric determination is based on the electrochemical detection of NADH which is generated in the enzymatic reaction of ethanol with NAD(+) under catalysis of ADH. The influence of various experimental conditions was examined for the determination of the optimum analytical performance. The sensor responds rapidly to ethanol with a detection limit of (5.0 +/- 0.3) x 10(-7) mol 1(-1). The response current increases linearly with ethanol concentration up to 5 mmol 1(-1). The sensor remains relatively stable for about 1 week.     

A comparative study of quantitative structure-activity relationship methods based on gallic acid derivatives

By using hologram quantitative structure-activity relationship (HQSAR) and comparative molecular field analysis (CoMFA) methods, the relationships between the structures of 49 gallic acid derivatives and their analgesic activity have been investigated to yield statistically reliable models with considerable predictive power. The best HQSAR model was generated using atoms, bond and connectivity as fragment distinction parameters and fragment size 5-7 from a hologram length of 307 with 3 components. High conventional r2 (r2 = 0.825) and cross-validation r2 (r2(cv) = 0.726) values were obtained. CoMFA analyses varying lattice size and location, grid spacing, probe charges and using, Tripos standard and Indicator force field were performed. The best model was developed with 4 components using sp3-hybridized carbon atom with +1.0 charge as probe, grid spacing (2 A), lattice offset (1.0, 3.0, -2.5). The CoMFA model showed a conventional correlation coefficient r2 of 0.889 and across-validation r2(cv) equals to 0.633. The robustness and predictive ability of the HQSAR and CoMFA models have been validated by means of an external test set. The results indicate that both models possess high statistical quality in the prediction of analgesic potency of novel gallic acid analogs.